- В наличии
от 10 руб.
- +7 (495) 740-23-22
- +7 (929) 662-27-24
День Время работы Перерыв Понедельник 08:00 — 18:00 Вторник 08:00 — 18:00 Среда 08:00 — 18:00 Четверг 08:00 — 18:00 Пятница 08:00 — 18:00 Суббота Выходной Воскресенье Выходной
* Время указано для региона: Россия, Москва
Snowplow for backhoe loader
Snowplow for front loader
Snowplow for XGMA, HYUNDAI, Terex, NewHolland, Caterpillar, Komatsu, JCB, Volvo, Cas, HIDROMEK, Snowplow for HYDREMA, MST, Tarsus, Veniere, JohnDeere, SDLG, XCMG, Hitachi
screw diameter 390-550 mm
Snowplow for forklift excavator
In the municipal economy, the auger with throwing working bodies are designed to remove snow shafts, clean sidewalks and tracks from tightly packed snow cover and freshly fallen snow with a thickness of 0.1 m to 0.7 m.
It is possible to throw snow away at a distance of 2 m to 15 m or to load into a vehicle from collected heaps and shafts. Snowplows for a front loader of this type have two working bodies, one of which cuts the snow cover and moves it in the transverse direction to the middle part of the machine, acting as a feeder, while the second grasps it and throws it aside. According to the type of working bodies, snow-harvesters are divided into screw-rotor, milling rotor and plow-rotor ones. The most widespread were screw-rotor snowplows in which one or two augers are used for cutting and raking snow, and a centrifugal impeller is used for throwing snow. Rotations of the centrifugal impeller are several times higher than the revolutions of the screw. The range of the ejection of snow is determined by the rotations of the centrifugal impeller. The screw and impeller drive is carried out by a hydraulic motor from the hydraulic system. The size and productivity of the schnorocators depends on the power of the tractors or forklifts for which they are installed. The minimum size (width) of the snow-picker is 0.9 m and the maximum width is 3 m.
- Цена: от 10 руб.